5
CAUTION:
The nickel charge program menus are to be used ONLY for the charging and discharging of nickel battery packs. Charging other battery types using the nickel charge programs will
damage the battery or the charger.
1. Connect the banana plugs of the battery adapter cable to the
Power Output Black (–)
and
Power Output Red (+)
, making sure that the positive and negative connectors are not
reversed.
2. Connect the battery connector to the battery adapter cable.
3. Press the
Left
and
Right Arrows
on the
LCD Touch Screen
to scroll through the main menu
screens until you reach Program Select=Ni-MH/Ni-Cd.
Program select=NiMH
CHG
DCHG
N i M H
CYCLE
4. Press
CHG
.
NiMH CHARGE
Capacity : 50mAh
Current : 0.1A
CHG Mode
:
Man
Press&Hold : CHARGE
BACK
SELECT
5. Press a parameter to highlight that parameter.
6. Press the
Up
and
Down Arrows
to edit the parameter.
7. Press
Select
to save the parameter.
8. Once the parameters are at the desired settings, press and hold
CHARGE
.
9. The charger will check the battery and charger settings and charging will begin. The charger
will beep and display the following screen:
NiMH CHG
000:09S
Capacity : 2mAh
Current : 1.8A
Voltage : 7.98V
Resistance : ****mΩ
Peak Temp.
:
No sens
10. Press the
arrow
in the top right of the
LCD Touch Screen
to see the rest of the Charging
information.
11. Press
Graph
to see the battery voltage graph. Press
Back
to return to the charging screen.
Data NiMH = Graph
12. Press
STOP
at any time to stop charging.
13. When charging is complete, the charger will sound a series of beeps and display the following
screen:
NiMH DONE
026:01S
Capacity : 671mAh
Current : 0.0A
Voltage : 9.25V
Resistance :
14mΩ
Peak Temp.
:
No sens
14. Disconnect the battery from the charger.
Only Ni-MH is shown in the following three sections.
5 - NICkEL (NI-Mh/NI-CD) ChArgINg
6 - NICkEL DISChArgINg
1. Connect the banana plugs of the battery adapter cable to the
Power Output Black (–)
and
Power Output Red (+)
, making sure that the positive and negative connectors are not
reversed.
2. Connect the battery connector to the battery adapter cable.
3. Press the
Left
and
Right Arrows
on the
LCD Touch Screen
to scroll through the main menu
screens until you reach Program Select=Ni-MH/Ni-Cd.
Program select=NiMH
CHG
DCHG
N i M H
CYCLE
4. Press
DCHG
.
NiMH DISCHARGE
End Volt
:
0.10V
Capacity : 50mAh
Current : 0.1A
Press&Hold : DISCHRG
BACK
SELECT
5. Press a parameter to highlight that parameter.
6. Press the
Up
and
Down Arrows
to edit the parameter.
7. Press
Select
to save the parameter.
8. Once the parameters are at the desired settings, press and hold
DISCHRG
.
9. The charger will check the battery and charger settings and discharging will begin. The charger will
beep and display the following screen:
NiMH DCHG
000:34S
Capacity : 16mAh
Current : 1.8A
Voltage : 8.43V
Resistance : ****mΩ
Peak Temp.
:
No sens
10. Press the
arrow
in the top right of the
LCD Touch Screen
to see the rest of the Discharging
information.
11. Press
Graph
to see the battery voltage graph. Press
Back
to return to the discharging screen.
Data NiMH = Graph
8.39V 000:47S
12. Press
STOP
at any time to stop discharging.
13. When discharging is complete, the charger will sound a series of beeps and display the
following screen:
NiMH DONE
026:01S
Capacity : 671mAh
Current : 0.0A
Voltage : 9.25V
Resistance :
14mΩ
Peak Temp.
:
No sens
14. Disconnect the battery from the charger.
