Dynamic TRE-75 TAMPING RAMMER, Руководство по эксплуатации

Страница: 18 / 32

- 17 -
sealing washer is in poor condition, or if the electrode is worn heavy
carbon build is found.
4
、
Measure the spark plug electrode gap with a wire-type feeler gauge.
Correct the gap, if necessary, by carefully bending the side electrode.
The gap should be: 0.6 - 0.7mm (0.024 - 0.028 in)
5
、
Check sealing washer, Install the spark plug carefully, by hand, to
avoid cross-threading.
6
、
After the spark plug is seated, tighten with a 5/8-inch spark plug
wrench to compress the sealing washer.
7
、
When installing a new spark plug, tighten 1/2 turn after the
spark plug seats to compress the washer.
8
、
When reinstalling the original spark plug, tighten 1/8-1/4 turn after
the spark plug seats to compress the washer.
NOTICE
！
A loose spark plug can overheat and damage the engine. Over
tightening the spark plug can damage the threads in the cylinder head.
9
、
Attach the spark plug cap to the spark plug.
EASY TROUBLESHOOTING
WHEN ENGINE WILL NOT START:
Perform the following checks before you take the engine to your Robin
dealer.
If you still have trouble after completing the checks, take the engine to
your nearest Robin dealer.