Dynamic iPortal2 Скачать руководство пользователя страница 38

Страница: 38 / 72

GBK52983 iPortal2 User Manual Issue 3

iPortal – Accessibility

iPortal – Accessibility

The iPortal Accessibility feature is an optional

upgrade* for the iPortal2 unit that provides you

with the ability to navigate and control your iOS

device using a DX/DX2, or Shark Remote.

Wheelchair users with limited hand function can

operate iOS devices using this feature. iPortal

Accessibility is very easy to configure and

operates in one of two modes:

•

with Apple’s VoiceOver, or

•

with Apple’s AssistiveTouch

Your iOS device can easily switch between the two modes of operation. The mode

that you choose to work with depends on what you want to achieve and what you

feel comfortable with.

* The iPortal Accessibility feature is an optional software upgrade for the iPortal2,

which can be purchased from the AppStore via ‘In App Purchase’ within the

Dashboard application. The iPortal2 is also available with the iPortal Accessibility

feature already enabled from the factory (Dynamic Controls Part No: DJ-BTINT-ACC).

Please see your dealer / therapist for more details.
An upgrade to the iPortal2 firmware may be required to access the Accessibility

feature. If this is the case, then first, go to iTunes and download the latest Dashboard

version. After this, refer to the Firmware upgrades section on page 16 to upgrade the

iPortal2 firmware.
If the firmware of the iPortal2 module is up-to-date and the iPortal Dashboard

application does not ask to upgrade the firmware of the iPortal2 module, then

proceed to the Activating iPortal Accessibility section (4.3.4).

NOTE

No Wizard reprogramming is required for the Accessibility feature.

Содержание iPortal2









































































Результаты поиска

Содержание iPortal2

Отзывы:

Похожие инструкции для iPortal2

Бренды по названию

Популярные бренды

Dynamic iPortal2, Руководство пользователя

Результаты поиска

Содержание iPortal2

Отзывы:

Похожие инструкции для iPortal2

Бренды по названию

Популярные бренды