Dynamic iPortal, Руководство по установке

Страница: 13 / 27

13 Installation
3.1.3 Connecting the module
WARNING
Do not use damaged or abused cables or connectors. A damaged
cable can potentially produce localised heat, sparks or arcing and
can cause burning or fire resulting in injury or death.
CAUTION
Prevent water or dirt entering the module through the unused DX or DK
connector. The module is supplied with rubber bungs for both
connectors.
3.1.3.1 Connect the charging cable
Step 1: Assemble the USB cover (see diagram below) around the USB end of the charging
cable
Step 2: Insert the charging cable into the Apple USB connector of the iPortal module
Step 3: Attach the USB cover to the iPortal module using the two screws provided
Assembling the USB Cover
3.1.3.2 Connect the BUS cable
The iPortal module connects with either the Shark or the DX BUS. Do not connect the module
to both Shark and DX at the same time. No damage will result if both are accidently
connected, but the system will not work correctly until one is disconnected. The iPortal
module automatically detects which bus is connected.
CLICK!