Dynamic iPortal 2, Руководство по установке

Страница: 18 / 28

18 GBK52981 iPortal2 Installation Manual Installation
5.1.4.2 Pairing the iOS device with the iPortal2
An iOS device communicates with the iPortal2 module using a Bluetooth
®
wireless
connection. Before using an iOS device with the iPortal2, a Bluetooth
®
wireless connection
needs to be established between the two; this is called pairing . Pairing is normally a one-off
procedure: that is, once an iOS device has been paired with the iPortal2, it will remain paired
during normal operation.
To pair the devices, follow the steps below. (The numbers in square brackets refer to the
images below).
Step 1: Turn the iOS device ’s Bluetooth On. The iOS device will start searching for nearby
devices
NOTE
To switch the iOS device’s Bluetooth on, start from the iOS device’s Home screen, and
select:
Settings [1] ► General [2] ► Bluetooth [3] ► Switch Bluetooth On [4]
Step 2: Turn the wheelchair’s power off and then on [5]. This will switch on the iPortal2 ’s
Bluetooth.