10
4. Wood cabin installation order: Floor Panel Front Panel Right Side Panel Left Side
Panel Rear Panel Bench Emitter Panel Bench Roof Panel Roof Cover
5. Tools Required: Philips Screwdriver and Ladder
B. Installing the FLOOR PANEL
1. Place the FLOOR PANEL on the floor.
Some models have wood braces that must be
installed on the underside of the FLOOR PANEL.
Please check to see if such wood braces
were packed in the box containing the FLOOR PANEL. If so, mount according to the
designated labels located on the underside of the FLOOR PANEL. Once installed, turn the
FLOOR PANEL right side up. Make sure the front side of the FLOOR PANEL is facing the
correct direction. The notches on the floor will be closer to the rear of the sauna than the front
of the sauna. (see Panel Descriptions)
C. Installing the FRONT PANEL and SIDE PANELS
1. Place the FRONT PANEL onto the recessed area on the FLOOR PANEL. Align guides on the
RIGHT SIDE PANEL with the guide inserts on the FRONT PANEL. The RIGHT SIDE PANEL
will need to be lifted in order to lock the guide inserts on the FRONT PANEL into the guides on
the RIGHT SIDE PANEL. Secure in place by pulling down on the RIGHT SIDE PANEL. Make
sure all the guides are locked in place and the top of the LEFT SIDE PANEL is even with the
FRONT PANEL. Do the same with the LEFT SIDE PANEL. (see figure 10)
Figure 10
D. Installing the REAR PANEL
1. Remove the protection paper from the buckles. Place the REAR PANEL onto the recessed
area on the FLOOR PANEL. Attach the REAR PANEL to the SIDE PANELS and buckle
together. (see figure 11)
