Dynamic CCTV MX04, Руководство пользователя, Страница: 75 / 78

74
Operating Instruction & User’s Guide
⑤
After selecting the file to be upgrade and a window shown below appears.
[Figure 6-46. Firmware Upgrade Progressing Window]
※
Downgrading to a previous version is not supported.
※
It is recommended that the DVR ID should be the same as the remote controller
ID.
※ The upgrade information window will then appear within 15 seconds.
⑥
Read the information and select
{Yes}
to start the upgrade gradually. Select Read the information and
select {Yes} to start the upgrade gradually. Select {No} to return to
{System}
mode to return to
{System}
mode.
⑦
After the update is completed, the system will be rebooted.
⑧
The system will automatically start. Upgrade is then completed.
⑨
Move to
{Menu}

{Miscellaneous}

{DVR Information}

{3. Software Version}
to check the version.
※
All setup data are a fixed value in
{Menu}

{Setup}

{System}

{6.
Upgrade}

{Setup}
.
１
-
４２
-
８
Factory Default
①
Move to
{Menu}

{Setup}

{System}

{7. Factory Setup}
.
②
Select {Yes} when Initialization (Yes/No) Window appears.
Note that all setting data will be initialized.
※
It goes back to Factory Default Value.
１
-
４２
-
９
RS232C Port
①
Move to
{Menu}

{Setup}

{System}

{8. RS232C Port}
.
②
On the selection window, select the device using the arrow keys and the Select button.
１
-
４２
-
１０
Alarm
Alarm is to notify system incidents [Video Signal loss/ HDD full/ FAN fail/ HDD fail/ HDD warning] to [Alarm/ E-