background image

ENGINE IMMOBILISATION

When the system is armed the 
engine is immobilised. The actual 
point of immobilisation varies from 
vehicle to vehicle, normally fuel and 
starter motor are immobilised. 

SPECIFICATIONS

Manufactured by 

Dynamco Pty Ltd

Model Number

Cyclops 661

Supply voltage

+12VDC

Current consumption

< 10 mA

BATTERY REPLACEMENT

Using a small Phillips-head screwdriver, remove the screw(s) at the back 
of the remote and carefully separate the two body housings taking take 
care not to disturb the circuit board. Remove the old battery whilst paying 
attention to the orientation of the positive and negative terminals. Insert 
new battery in identical fashion to the original and re-assemble remote. 
Replace screw(s) and test remote control by pressing main button. For 
further information, please contact your local Cyclops service centre. 

Remote battery type 23a.

PROBLEM SOLVING

System won't activate when the door is opened
- Make sure you have used the remote to set the system. It will not trigger if 
the system has auto armed.
- Make certain the system is activated.  LED should be flashing on the 
dashboard.
- Make sure that the interior dome light has not been left in the permanently 
ON position.
- Make sure that you have allowed at least 10 seconds after setting the 
system, before opening the door.
System won't activate or deactivate.  LED won't flash or extinguish
- Make sure that ignition switch is in the OFF position.
- Make sure the vehicle battery is not flat.
- Try your spare remote transmitter unit.
The remote fails to operate
If the remote fails to operate and the LED does not light up when the button 
is pressed then change the battery. To do this you will need a small Philips 
head screwdriver. (See Battery Replacement)

MANUFACTURER’S HISTORY

Dynamco has been involved in 
the science of electronic vehicle 
security technology for over 12 
years. From small beginnings 
Dynamco has grown steadily to 
become one of the world’s 
leading specialist companies in 
electronic vehicle security, 
designing and customizing 
s y s t e m s   t o   c o m b a t   t h e  
i n c r e a s i n g l y   s o p h i s t i c a t e d  
professional car thief without 
compromising the user friendliness of the systems. Systems are exported 
all over the world, it is easy to name drop when your customer list is so 
impressive. Recently add to the list of BMW & Honda in Hong Kong, Toyota 
Indonesia, the FBI in the USA, Australia's largest Hyundai dealer, 
Australia’s largest Mitsubishi dealer, as well as AMWAY of New Zealand. 
Government departments all over Australia, including the West Australian 
Police Force plus hundreds of thousands of motorists world wide have 
learned to rely on the sophistication and reliability and effectiveness of 
Dynamco’s electronic vehicle security systems Each working day over 
1000 of systems are installed somewhere in the world, from Perth to Paris, 
from Sydney to Seattle. Dynamco pioneered Radio Frequency 
Identification Systems and Random Encryption Technology (Code 
Hopping). Both techniques now being fundamental to the majority of 
vehicle security systems installed worldwide. Dynamco is cognisant of the 
stringent requirements of vehicle electronics and the extremely hostile 
environment to which the equipment is subjected. All Dynamco designs 
therefore take these and many other factors into consideration. In 1990 
Dynamco won the prestigious Australian Design Award but we haven’t 
rested on our laurels. Our engineers keep Dynamco at the cutting edge of  
electronic vehicle security.

OVERRIDE PIN NUMBER:   __     __

ANNUAL INSPECTION 

Dynamco prides itself on the durability and integrity of its car security 
systems. We welcome users to contact a Cyclops service centre every 
twelve months for an annual inspection. (Please note a charge may be 
levied for this inspection)

WARRANTY TERMS & CONDITIONS

The Dynamco range of Cyclops Security Systems is covered by an 
extensive warranty (See Below For Period). In the unlikely event of a faulty 
system Dynamco will either replace or repair the system at no cost during 
the detailed period. The warranty does allow for the following conditions ~
Subject to the conditions stated below, Dynamco Pty Ltd warranty the 
product to be free from manufacturing defects and faulty material within 
the warranty period stated.
·

That the warranty registration has been completed in full at the time of 

purchase / installation and is produced when warranty service is sought
·

 The warranty does not cover general maintenance such as cleaning / 

adjusting of door, boot, bonnet or any entry point switch, nor replacement 
of consumables items such as transmitter batteries, lighting circuit bulbs / 
switches.

The warranty shall be null & void if: - 
1.

Any person other than by an Authorised Cyclops Sales, Service & 

Installation Centre has repaired the product.
2.

Should a system / part defect become apparent within the warranty 

period DYNAMCO PTY LTD will repair the product free of charge for parts 
and labour. The warranty does not cover service labour content or mobile 
service content.
3.

The product has been altered or tampered with in any way, or the 

serial number altered, defaced or removed.
4.

The defect has been caused by negligence by the owner or their 

agent / third party.
5.

The product has not been operated correctly, installed by an 

unauthorised Cyclops installer or has been subjected to misuse or undue 
wear and tear
6.

Siren, control module, remote controls or any other system part are 

damaged by water.
The warranty does not cover the following costs: -
7.

Transport of the product to and from Cyclops Service Centres.

8.

Insurance of the product whilst in transit to or from the Cyclops 

Service Centres
9.

Cost of any service call / labour where the product is found by Cyclops 

to be in good working order The benefits conferred by this Warranty are in 
addition to all other rights and remedies, which the consumer has 
conferred in law.

No liability is accepted for any loss, loss from, damage to or inability to use 
the vehicle to which the system is installed.

WARRANTY REGISTRATION

MUST BE COMPLETED BY RETAILER AT TIME OF INSTALLATION

DATE OF INSTALL’ :

PURCHASED FROM :

OWNER’S NAME :

TYPE OF VEHICLE :

VEHICLE REGO’ :

WARRANTY PERIOD :

A) CONTROL MODULE ONLY :
B) REMOTE CONTROLS

AND SIREN :

AUTHORISED BY

SIGNED :

Отзывы: