5
Insert the direction pushrod into the
hold of quick-controller and tighten
clamp connectors.
As shown, Insert speed controller
wires into THR channel of receiver.
As shown,Fix the nose landing gear
on fuselage with 2.5X8mm screw.
As shown, Insert Z-bend of pushrod
into the hole of the nose landing gear.
As shown, Apply the foam glue to the
stuffing foam and insert it into fuselage
as shown.
As shown,Insert elevator pushrod into
the hold of quick-controller and tighten
clam connectors.
(Remark: The servo should be in center position)
