dimensions
4
DTP170 Installation Manual Rev C.docx
DTP170 with Wallbox Fitted
DTP170 without Wallbox
installation
Selecting an Installation Location
Remember the display height should be equal to, or slightly below, the eye level of all users. Avoid
a location in which bright light is present, either directly in front of, or behind, users.
Installing the Product
The DTP170 Touch Screen is designed to be flush-mounted, with or without a wallbox. If using a
wallbox, separate the wallbox from the Touch Screen and make sure no dust or debris enters the
Touch Screen during installation. Knock out a cable entry point on the wallbox, then prepare a
hole:
140mm high x 218mm wide x 71mm deep
.
The wallbox can then be fixed in place using an appropriate method.
Power Supply
This product consumes up to 600mA from the DyNet network. Ensure that appropriate DyNet DC
supply is available to operate this product and any other DC supply consuming peripherals that
may be present on the bus.