L 2003
Digital TV Antenna Kit
Step 2: Install the antenna to the antenna base.
1. Find the locating slot of the bracket.
2. Aim at the locating slots of the bracket
and base, then press the antenna in.
1. Insert the screw into the hole position
of the antenna bracket.
2. Tighten the nuts and the antenna is
installed.
How to connect the antenna to the TV
1. Connect the F male of antenna to the F female of the power supply.
2. Connect the F male of the power box to the ANT/IN connector on Set top box or TV
(built-in-tuner).
3. Power the antenna by plugging the antenna power box’s USB connector into an open USB
port on the TV or the set top box or into a wall outlet with one power adapter (included).
4. If you find that the TV cannot receive any signals, please check the following;
• Verify that the antenna, power supply, TV and set top box are properly connected.
• Make sure your TV has a tuner, if it doesn’t we recommend using a set top box.
• Whether the USB interface of the antenna power supplier is connected with the power
charging input.
Please note: Reception quality and the number of channels received are dependent on mul-
tiple factors, like distance from TV broadcast tower, broadcast power, line of sight, terrain,
metal construction materials and other environmental factors.
Antenna Installation
