Dynalink® A 3135F HDMI Splitter
EDID FUNCTIONS:
Copy: Output 4 is prior port
a) When output 4 is connected to one display, another display which is connected to output 1/2/3 will fol-
low the Resolution of output 4, which could be lower than 4K UHD.
Auto: Default 4K UHD@60Hz on both HDMI outputs
Mixed: Always follows the lowest resolution of the displays connected to the 4 outputs, so that the dis-
plays both show the source properly.
NOTE: The HDCP Version is prior to EDID, when the source is HDCP2.2. If the TV supports HDCP2.2, it
will output 4K@60Hz. If the TV doesn’t support HDCP2.2, it will output 1080p. Please see table below:
Support HDR under copy EDID and Mixed EDID mode!
Connecting and operating:
1) Connect the HDMI input source to input port of HDMI splitter.
2) Connect the HDMI splitter output ports to the displays.
3) Power up splitter, source and displays.
CONNECTION DIAGRAM
3
Input source
HDCP2.2 4K@60Hz
HDCP2.2 4K@24Hz
HDCP1.4 4K@24Hz
HDMI Display Support HDCP2.2
HDCP2.2 4K@60Hz
HDCP2.2 4K@24Hz
HDCP1.4 4K@24Hz
HDMI Display Doesn’t Support HDCP2.2
HDCP1.4 1080p@60Hz
HDCP1.4 1080p@24Hz
HDCP1.4 4K@24Hz
