dynafor LLX2, Руководство по эксплуатации и техническому обслуживанию

Страница: 59 / 148

GB
6.3.1.2.4. Dynamic effect filtering
NOTE: In « Max » mode, the filter function is deactivated.
When the « Max » mode is exited, the filter function is automatically reactivated.
The measurements sent to the PC on the USB link are not filtered.
6.3.1.3. Languages
See section 6.2.4.6
6.3.2. Other icons on the standard screen
6.3.2.1 Sensor icon:
- Sensor settings and data
6.3.2.2. Display Unit icon: - Display unit settings and data
6.3.2.3 Identification icon: ID - Display unit and sensor identification and data
Display Action Comments
Return to main display
Filtering:
Display: used to stabilise the value
displayed by calculating the running
mean during the configured period.
Relay: used to time-delay triggering by
calculating the running mean during the
configured period. Only relays 1 to 4
are filtered; relay 5 is triggered
instantaneously.
Period : 0 to 5 s in steps of 0.25 s
Indicator, filter on display
Indicator, filter on thresholds
Indicator, filter on display and
thresholds
ESC
Return to main display
Select a parameter, validate
with
, and modify using
arrows.
Select a parameter, validate
with
, modify using
arrows.
No action
Display unit parameter display:
AD = display unit address
This screen is displayed if the
sensor/display unit pair is locked.
ESC
Return to standard display
No action
No action
Return to standard display Display identification of elements
in the network:
Sensor: Serial No., capacity,
hardware version, software
version, date of last
calibration or adjustment.
Disp. Unit: Serial No., hardware
version, software version.
ESC
Return to standard display
No action
No action
26bis
Return to standard display
Sensor parameters display:
AD 22 = sensor address
Switch from standard to power saving
mode after 28ʼ if variation step > 15%
of the stress. Enabled
Switch to power saving mode in
standby.
Disabled X
TOTAL SHUTDOWN: Powers down the
sensor. To power up again you must
use the ON/OFF switch on the sensor.
ESC
Return to standard display
Select an icon and enable the
available options
Select an icon and enable the
available options
27
28
29
23