background image

21

IMPORTANT

•  Always stop ride-on toy when changing the direction to avoid damage to the 

gears and motor.

•  This ride-on toy has an adjustable seat belt; instruct children on how to fasten 

the seat belt before using.

•  Do not let any child touch the wheels or be near them when the car is moving. 
•  To avoid accidents, inspect the ride-on toy before riding to ensure that it is in 

proper working order and safe to ride.

•  This toy has no brake; to stop, remove foot from the foot pedal.
•  Check all the screws, cap nuts and protective coverings regularly and tighten as 

required. Check plastic parts on a regular basis for cracks or broken pieces. 

•  Your new battery must be charged for at least 18 hours before you use it in your 

ride-on toy for the first time.

•  Do not wash the ride-on toy with water; clean it with a cloth.

SAFETY PRECAUTIONS

•  The child must have adult supervision at all times.
•  Do not ride on the road, footpaths, near pools, or bodies of water.
•  Do not allow children under the recommended age to ride the ride-on toy; refer 

to the age grading.

•  Do not allow riders over the recommended weight rating or under the age 

grading to use the ride-on toy.

•  To stop the ride-on toy, you must take your foot off the pedal.
•  Charging should only be done by an adult.
•  An adult must teach the child how to operate the ride-on toy.
•  Do not ride on hills or slopes, in sand or on other soft, wet, or slippery surfaces.
•  Do not use a different size battery. Use only original or recommended 

replacement batteries.

•  The ride-on toy is designed to carry only a maximum weight of 130 lb at a time. 

Never allow more than two riders or over-load the ride-on toy.

•  This product should be assembled and checked by adults before use.

 WARNING:

 This ride-on has no brake; to stop take foot off foot pedal. Do not park 

or ride on any slopes or steep inclines.

Содержание Realtree



































Отзывы: