Page 9
A. Open the handlebar height adjustment clamp by releasing the
adjustment clamp lever.
B. Extend the handlebar to the desired height. (When the handle-
bar has extended to the preset height, a Pop Button inside the
stem will engage into the hole. There are two preset heights.
DO NOT exceed the maximum height.)
C. Hand tighten the adjusting nut on the clamp until it is just snug.
D. Push the lever to the closed (locked) position. You should
feel resistance while closing the lever. If no resistance is felt,
reopen the lever, tighten the nut a couple more turns, close the
lever and test again. Repeat until reistance is felt.
WARNING:
FAILURE TO PROPERLY TIGHTEN THE
STEERING HEIGHT ADJUSTMENT CLAMP CAN RESULT
IN IMPROPER HANDLEBAR MOVEMENT AND LOSS OF
STEERING CONTROL.
STEP 4: RIDING YOUR SCOOTER
WARNING:
USE CAUTION WHEN FOLDING AND
UNFOLDING YOUR SCOOTER TO AVOID PINCHING
YOUR FINGERS.
BEFORE EACH RIDE
1. Verify that the scooter is properly unfolded and locked and is
adjusted for your size.
2. Verify the scooter is working properly.
3. Re-read and follow all safety warnings in this instruction
manual.
