9
2. SIDE VIEW MIRROR ASSEMBLY
NOTE:
Identify the left and right mirrors for
assembly.
• Insert the side view mirror into the hole in
the front of the vehicle body as shown.
• Insert and tighten the 4 x12 round head
screw with a screwdriver.
• Repeat for the other side.
4 x 12 Round
Head Screw
3. TAIL LIGHT & REAR LICENSE
PLATE
• Fit the tail light to the vehicle body as
shown.
• Tighten three 4 x 12 round head screw to
secure it with a screwdriver.
• Fit the rear license plate to the vehicle
body as shown.
• Tighten two 4 x 12 round head screw to
secure it with a screwdriver.
HANDLEBAR BATTERY SAFETY INFORMATION:
Batteries may leak fluids that can cause chemical burn, injury or ruin your product.
To avoid battery leakage:
• Install batteries correctly, observing the polarity (+/-) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (NiMH).
• Remove the batteries from the battery compartment when the unit will not be
used for an extended period of time.
• Always remove exhausted batteries from the battery compartment.
• Do not dispose of batteries in fire.
• Do not short circuit the supply terminals
• Replace the batteries when the horn sounds become distorted.
