ASSEMBLY
Your new vehicle requires adult assembly. Please set aside around 35 minutes
for assembly. Please identify all parts before assembly and save all packaging
material until assembly is complete to ensure that no parts are discarded.
Tools Required:
WARNING:
Children can be harmed by small parts, sharp edges and sharp
points in the vehicle’s unassembled state, or by electrical items. In the unassembled
state, this package contains small parts. Adult assembly is required; children should
not handle parts, or help in assembly of the vehicle.
1. Front Wheel Assembly
8
Phillips Screwdriver
(not included)
Standard slip joint pliers
(not included)
17mm Box Wrench
(included)
Ø
Ø
. Turn the vehicle body upside down.
. Remove all parts from front axle.
. Fit a
12 washer onto the axle.
. Fit a bushing onto the axle.
. Slide a wheel onto the axle, make the bushing match inside the wheel.
. Install a
12 washer and locknut, then tighten it. (Note: Do not over-tighten)
. Fasten the axle cap.
. Repeat above operation for the front wheel on the other side.
