Dynacord X 1202, Руководство пользователя

Страница: 4 / 17

Most important performance features of your modular power amplifier system.
Open input and output architecture.
The design of the X-Amps’ input and output channels also follows the modular concept. The open
architecture allows to comfortably match the basic power amplifiers to changing operational environments.
Therefore, different Xi-input modules as well as Xo-output modules are available. Even if an X-Amp power
amplifier is finally configured, quick and comparably inexpensive modification is still possible. Whether
you change the output connection to system cabling, include input transformers, or replace complete
module groups, opening the power amplifier itself is not necessary.
Besides, all X-Amp Series power amplifiers are prepared for later remote control operation.
The modular structure including the input and output channels is future-oriented and therefore your
guaranty to be able to quickly react to advancements in connection or signal transmission techniques.
Additionally, it provides the possibility to match your X-Amp Series power amplifier to specific requirements
at any time. This open input/output architecture ensures that your X-Amp is not going to belong to the
“scrap-heap”.
Module slots on the front panel.
The module slots on the front panel of the X-Amp Series power amplifier allow the insertion of Xm-filter
and-signal processor modules. A wide range of modules with individual functions are available. In this
way it is possible to integrate the signal processing which normally is realized through external equipment
into the power amplifier. The advantage of handling things this way is quite obvious. Using Xm-modules
provides the opportunity to set up very compact sound reinforcement systems, individually matching a
particular application. Cable length and connections are reduced to their minimal amount. In the daily
work this improves operational reliability and lessens causes for faulty operation. Compared to conven-
tional solutions using external equipment, the modular concept not only saves space but also money.
By placing the signal processing modules on the front panel of the power amplifier all indicators and
controls can be accessed at any time. The X-Amps provide comfortable control and monitoring from their
front panel.
X-Amp basic version - without front modules.
The input module Xi-11 and the output module Xo-1 are already installed when the appliance is shipped.
Of course, the X-Amp already works without front modules. The input sensitivity of the X-Amps is set to
a constant value of 1.4Veff (5dBu) with linear frequency response.
The basic version does not offer level controls, since their functionality is provided through the use of the
front modules or specific input modules, depending on the individual field of use.
X-Amp SYSTEM
14