User’s Manual
8
2.2
Switch / Connector Definition
Configuring the Dome Camera’s ID and communication protocol are required
before connecting the Dome Camera to other devices. The switches used for
configuring these settings are located on the camera’s back plate. Additionally,
the 22-Pin Connector for Data Cable connection and ISP Connector for
firmware upgrade kit connection are also set on the back plate.
Please refer to the diagram and table accompanied with for use of each switch /
connector.
Indoor Outdoor
Item
Definition
Remark
A
I/O
ALARM I/O
B
ID
Dome Camera ID Setup DIP Switch
C
BNC
BNC Video Output
D
SETTING
Communication Switch Setting
E
Protocol
Camera Control Protocol Setting
F
RS485
RS485 Connector
G
AC24V Connector
Power connector
