User’s Manual
39
•
HOME FUNCTION
The item is used to enable or disable the HOME function. Use the left/right
direction keys of the control keyboard to change the setting.
•
SELECT MODE
Select one of the modes that the dome should execute when the HOME
function is enabled and the RETURN TIME expires. The options include
<AUTOPAN>, <SEQUENCE>, <CRUISE> and <PRESET>. Use the
left/right direction keys of the control keyboard to change the setting, and
the items below will change in cooperating with your selection.
•
PRESET
POINT
Select a preset point where the dome should go after the Return Time
function, which will be mentioned later, is activated. The preset point(s)
should be set prior either in the PRESET setup menu or through the
keyboard.
SEQUENCE LINE
Select a sequence line that the dome camera should execute after the
Return Time function is activated. The sequence line(s) should be defined
prior either in the SEQUENCE setup menu or through the keyboard.
AUTOPAN LINE
Select an auto-pan line that the dome camera should execute after the
Return Time function is activated. The auto-pan line(s) should be defined
prior either in the AUTOPAN setup menu or through the keyboard.
CRUISE LINE
Select a cruise line that the dome camera should execute after the Return
Time function is activated. The cruise line should be defined prior either in
the CRUISE setup menu or through the keyboard.
•
RETURN
TIME
The dome starts to count down RETURN TIME when the dome idles, and
then execute the SELECT MODE function when the return time is up. The
RETURN TIME ranges from 0 to 128 minutes.
•
GO
If HOME function is enabled, users are allowed to execute HOME function
HOME SETTING
HOME FUNCTION
OFF
SELECT
MODE
PRESET
PRESET
POINT
001
RETURN
TIME
001MIN.
GO
ENTER
EXIT
YES
