SAFETY INSTRUCTIONS
Carefully Read all instructions before operating or servicing any Dynabrade
®
Abrasive Power Tool.
Products offered by Dynabrade are not to be modified, converted or otherwise alerted from the original design without expressed written consent from Dynabrade, Inc.
Tool Intent:
Dynorbital
®
Supreme Random Orbital Sander is used for sanding and finishing a variety of materials including wood, metal, plastic, fiberglass, solid surfaces,
composites, rubber, glass and stone.
Do Not Use Tool For Anything Other Than Its Intended Applications.
Warning: This power tool is not intended for use in potentially explosive atmospheres and is not insulated against contact with electrical power.
Training:
Proper care, maintenance, and storage of your tool will maximize its performance.
• Employer's Responsibility – Provide Dynorbital
®
Supreme operators with safety instructions and training for safe use of tools and accessories.
Accessory Selection:
• Abrasive/accessory RPM (speed) rating MUST be approved for AT LEAST the tool RPM rating.
• Before mounting an accessory, visually inspect for defects. Do not use defective accessories.
• Follow tool specifications before choosing size and type of accessory.
• Only use recommended fittings and air line sizes. Air supply hoses and air hose assemblies must have a minimum working pressure rating of 150 PSIG (10 bars, g) or 150
percent of the maximum pressure produced in the system, whichever is higher. (See Tool Machine Specifications Table.)
Parts Page Reorder No. PD12•32
Effective November, 2012
Supersedes PD09•03
Dynorbital
®
Supreme
Air Tool Manual – Safety, Operation and Maintenance
SAFETY LEGEND
WARNING
WARNING
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
WARNING
Eye protection must be worn at all times,
eye protection to conform to ANSI Z87.1.
WARNING
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
WARNING
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
WARNING
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
WARNING
Air line hazard, pressurized supply lines and flexible
hoses can cause serious injury. Do not use damaged,
frayed or deteriorated air hoses and fittings.
Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel
as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards
Institute (ANSI) Safety Code for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the
Use, Care and Protection of Abrasive Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for
Standards (EN) Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.
SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL
12,000 RPM Air Powered Random Orbital Sander
WARNING
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
•
Lead from lead-based paints
•
Crystalline silica from bricks and cement and other masonry products
•
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
For Serial No. 12K1000B and Higher
Models:
3/8 Orbit
3/16 Orbit
3/32 Orbit
56870 - 3-1/2" Non-Vacuum
56800 - 3-1/2" Non-Vacuum
56840 - 3-1/2" Non-Vacuum
56873 - 3-1/2" Vac-Ready
56803 - 3-1/2" Vac-Ready
56843 - 3-1/2" Vac-Ready
56874 - 3-1/2" Central Vac-Ready
56804 - 3-1/2" Central Vac-Ready
56844 - 3-1/2" Central Vac-Ready
56880 - 5" Non-Vacuum
56815 - 5" Non-Vacuum
56850 - 5" Non-Vacuum
56883 - 5" Vac-Ready
56818 - 5" Vac-Ready
56853 - 5" Vac-Ready
56884 - 5" Central Vac-Ready
56819 - 5" Central Vac-Ready
56854 - 5" Central Vac-Ready
56890 - 6" Non-Vacuum
56826 - 6" Non-Vacuum
56859 - 6" Non-Vacuum
56893 - 6" Vac-Ready
56829 - 6" Vac-Ready
56862 - 6" Vac-Ready
56894 - 6" Central Vac-Ready
56830 - 6" Central Vac-Ready
56863 - 6" Central Vac-Ready
