DYNABRADE
®
DYNABRADE, INC.,
8989 Sheridan Drive
•
Clarence, NY 14031-1490
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
Zone Artisanale
•
L-5485 Wormeldange—Haut, Luxembourg
•
Telephone: 352 76 84 94 1
•
Fax: 352 76 84 95 1
© DYNABRADE, INC., 2009
PRINTED IN USA
PD09.34R_06/09
Visit Our Web Site:
www.dynabrade.com
Email:
Optional Accessories
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
95821:
4oz. (118 ml)
95842:
1pt. (473 ml)
95843:
1gal. (3.8 L)
98263 Male Plug - 3/8" NPT
•
Provides up to twice the air flow
compared to standard plug design.
•
Plug has “ported” design to prevent
“starving” of the air tool.
Dynabrade Angle Gear Oil
•
Specifically formulated to saturate wick system in right
angle gear head.
95848:
2.5 oz. tube
95541:
Gear Oil Gun
96100 Motor Tune-Up Kit
•
Includes assorted parts to help
maintain and repair motor.
Additional Repair Tools (Not shown)
96244 -
Bearing Press Tool
96243 -
Bearing Press Tool
96346 -
Bearing Separator
96208 -
Repair Collar
97782 -
Pin Wrench
Wrenches
98283 -
Open End (1-5/8")
95281 -
Open End (19mm)
95049 -
Hex Key (3/16")
Dynaswivel
®
•
Swivels 360° at two locations which allows an
air hose to drop straight to the floor, no matter
how the tool is held.
95461
3/8" NPT.
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM
Reference Contact Information
1. American National Standards Institute – ANSI
1899 L Street, NW
11th Floor
Washington, DC 20036
Tel: 1 (212) 642-4900
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
Machine Specifications
Model
Motor
Motor
Sound
Maximum Air Flow
Spindle
Air Pressure
Weight
Length
Height
Number
hp (W)
RPM
Level
SCFM (LPM)
Thread
PSIG (Bars)
Pound (kg)
Inch (mm)
Inch (mm)
52657
1.3 (969)
6,000
76 dB(A)
40 (1138)
5/8-11" male
90 (6.2)
4.5 (2.0)
10 (255)
3-9/16 (90)
52802
1.3 (969)
7,200
78 dB(A)
42 (1189)
5/8-11" male
90 (6.2)
4.5 (2.0)
10 (255)
3-9/16 (90)
53868
1.3 (969)
8,500
76 dB(A)
40 (1138)
5/8-11" male
90 (6.2)
4.5 (2.0)
10 (255)
3-9/16 (90)
Additional Specifications: Air Inlet Thread 3/8" NPT • Hose I.D. 3/8" (10mm)
Sound Level is the pressure measurement according to the method outlined in ISO regulation ISO-15744
Apply 2-3
plunges
into lubrication
fitting every
24 hours of
operation.
Expect a gear life
of 500 hours
minimum, with
proper lubrication.
Special Greasing Instructions
•
Lubricate wick system through the angle gear oil fitting with 2-3 plunges for every 24
hours of use, to achieve maximum gear life. Prime pump to insure good oil flow.
Important:
Use only the recommended angle gear oil for the wick system.
Do not contaminate the wick with any other oil or grease product. Insure that all 3 plunges of
oil are injected through the fitting.
(Order
95848
Gear Oil and
95541
Gun)
