DYNABRADE
®
DYNABRADE, INC.,
8989 Sheridan Drive
•
Clarence, NY 14031-1490
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
Zone Artisanale
•
L-5485 Wormeldange—Haut, Luxembourg
•
Telephone: 352 76 84 94 1
•
Fax: 352 76 84 95 1
© DYNABRADE, INC., 2003
PRINTED IN USA
Visit Our Web Site:
www.dynabrade.com
Email:
Optional Accessories
95262
– 14 mm Open-end Wrench.
95281
– 19 mm Open-end Wrench.
96044 Motor Tune-Up Kit:
•
Includes assorted parts to help maintain
and repair motor.
Dynaswivel
®
Swivels 360° at two locations which
allows an air hose to drop straight to
the floor, no matter how the tool is held.
•
94300
1/4" NPT (Composite)
•
95460
1/4" NPT (Aluminum)
50971 Lock Ring Tool
•
Lock Ring Tool has a 3/8 in. square socket
for use with 3/8 in. drive; breaker bar,
ratchet head, or torque wrenches.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842:
1pt. (473 ml)
95843:
1gal. (3.8 L)
96232 #2 Arbor Press
•
This arbor is ideal for the disassembly
and assembly of air motors.
96346 Bearing Separator
•
Use the separator to remove
bearings and gears.
96211 Bearing Removal Tool
•
This tool is used to pass through the
I.D. of the bearing plate and to push
against the I.D. of the bearing.
96241 Bearing Press Tool
•
This tool is used to safely press a bearing
into a bearing plate or onto a shaft.
11.
Install the air motor into the
01447
Housing.
12.
Carefully secure the
01447
Housing in a vise with aluminum or bronze jaws. Hold the back portion of the housing opposite the lock ring so as not to
crush the housing.
13.
Install the
04078
Silencer into the lock ring.
14.
Apply a small amount of the Loctite #567 to the threads of the
01447
Housing. Use the
50971
Lock Ring Wrench or an adjustable pin spanner wrench
to install the lock ring. (Torque to 34 N•m/300 in.- lbs.)
15.
Install the disc pad.
Motor Assembly Complete. Tool Assembly Complete.
Throttle Lever Positioning Procedure:
1.
Secure the holding flats of the valve housing in a vise with aluminum or bronze jaws so that the
01447
Housing is pointing up.
2.
Slip the
01558
Collar down onto the valve housing to expose the
01461
Lock Nut.
3.
With a firm hold on the
01447
Housing, use a 34 mm or an adjustable wrench to turn the
01461
Lock Nut counterclockwise to loosen the
01447
Housing
from the valve housing.
4.
Orient the throttle lever to the operators desired grip and positioning.
Note:
Allow for additional rotation of the
01447
Housing as the
01461
Lock
Nut is tightened.
5.
With a firm hold on the
01447
Housing to reduce its rotation, use a 34 mm or an adjustable wrench to tighten the
01461
Lock Nut.
(Torque to 45 N•m/400 in- lbs.)
Loctite
®
is a registered trademark of the Loctite Corp.
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
