DYNABRADE
®
DYNABRADE, INC.,
8989 Sheridan Drive
•
Clarence, NY 14031-1490
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
© DYNABRADE, INC., 2010
PRINTED IN USA
PD10.42_12/10
Visit Our Web Site:
www.dynabrade.com
Email:
1. CSA International
8501 East Pleasant Valley Road
Cleveland, Ohio 4431-5575
Tel: 1 (216) 524-4990
Fax: 1 (216) 642-3463
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Reference Contact Information
Electric Dynafile
®
II
Contact Arms
Optional
40078 Adapter
allows use
of 24" long belts; extends reach to
7" when used with contact arm.
Arms for 4" to 12" workable reach.
45 PSI maximum.
Enter channels as
small as 7/16".
Belt Size:
1/2" W x 18" L.
Contact Wheel:
5/8" dia. x 3/8" W, rubber.
Platen:
1/2" wide.
Work on broad areas, leaves
in-line scratch, blend stainless.
11200
11024 steel platen available.
6-3/4" workable reach.
11286
Belt Size:
1/2" W x 24" L.
Contact Wheel:
5/8" dia. x 3/8" W, rubber.
Platen:
1/2" wide.
Grind on contact wheel
or platen; has 5-1/4"
workable reach.
11201
Belt Size:
1/2" W x 18" L.
Contact Wheel:
5/16" dia. x 3/8" W, steel.
Platen:
1/2" wide.
11287
*
Uses 20-1/2" Belts
Belt Size:
5/8" or 3/4" W x 20-1/2" L
Contact Wheel:
3/4" dia. x 5/8" W, rubber.
Platen:
3/4" wide.
11304
“The Banana Arm”
Work on broad areas;
leaves in-line scratch;
blend stainless.
Belt Size:
1/2" W x 18" L.
Contact Wheel:
5/8" dia. x 3/8" wide, rubber.
Platen:
1/2" wide.
2-1/2"
Rubber
11322
Guide-Cut
Removes raised material within
.020" or less without undercutting.
Guide Wheels
Prevent Undercutting
Belt Size:
1/2" W x 18" L. 60 to 80 grit.
Contact Wheel:
5/8" dia. x 3/8" W, rubber.
11350
*
“Bus Bar”
Excellent for cleaning oxide
off electrical bus bars. Arm
has a 12" workable reach.
Belt Size:
3/4" W x 34" L.
Contact Wheel:
5/16" dia. x 5/8" W, steel.
Platen:
3/4" wide, optional.
11220
*
, 11300
*
, 11301
*
, 11341
*
Polish Turbine Blades
Offset design and miniature contact
wheels. 2" strap polish in offset area; pol-
ish turbine blades and other contours.
11203
*
Order 11312 for heavy-duty version.
Grind over contact
wheel or platen.
Belt Size:
1/2" W x 18" L.
Contact Wheel:
5/8" dia. x 3/8" W, rubber.
Platen:
1/2" wide.
11204
– “Unique Offset Design”
Strap polish is easy with this arm!
Belt Size:
1/4" or 1/2" W x 18" L.
Contact Wheel:
1" dia. x 3/8" W, rubber.
Platen:
None due to offset design.
11206
*
Belt Size:
5/8" or 3/4" W x 18" L.
Contact Wheel:
3/4" dia. x 5/8" wide, rubber.
Platen:
3/4" wide.
tapered
Strap polish here
Order 11326 for Heavy Duty/Steel Construction version.
11280
Belt Sizes:
11220 uses 5/8" or 3/4" W x 18" L.
All others use 1/2" W x 18" L.
Contact wheels description for each above arm:
11220
: 5/16" dia. x 5/8" W, steel.
11300
: 1/4" dia. x 3/8" W, steel.
11301
: 5/16" dia. x 3/8" W, steel.
11341
: 5/16" dia. x 3/8" W, rubber.
Belt Size:
1/4" W x 18" L.
Contact Wheel:
1" dia. x 3/8" wide, urethane, tapered.
Platen:
No platen due to offset design.
Grind corners, enter
grooves, strap polish.