3
ASSEMBLY INSTRUCTIONS
1.
Remove Fan Knock-Out Panel
using a screw driver.
FF
2.
With the Rocker Switch posi-
tioned in the top right corner,
attach fan to rear panel of the
heater using the 4 screws
provided.
3.
Plug Power Cord into a properly
grounded three-prong receptable.
CAUTION:
Wall mounted heater must be disconnected from gas supply and
removed from the wall before installing fan accessory. Contact a qualified service
person to do this.
1
2
3
Grounded Three-Prong
Receptacle
Rocker Switch
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and diagram under. If any part is missing or dam-
aged, do not attempt to assemble, install or operate the product. Contact custom-
er service for replacement parts at 1-877-447-4768.
Philips Head Screw x 4
3
Package Contents:
