Dyna-Glo DGN576DNC Скачать руководство пользователя страница 3

3

•  Use caution when lifting and moving the unit to avoid back strain or back injury. Do not move the

unit while it is in use.

•  

DO NOT

 operate the unit near or under flammable or combustible materials such as decks, porches

or carports. A minimum clearance of 36 in. (91.4 cm) is recommended. 

DO NOT

 operate the unit

under overhead construction.

• A minimum clearance to combustible construction is 36 in. (91.4 cm) from sides and back.

DO NOT

 use this appliance as a heater.

•  Operate the unit on a stable, level, non-flammable surface such as asphalt, concrete or solid

ground. 

DO NOT

 operate the unit on flammable material such as carpet or wood deck.

• Use caution when assembling and operating this unit to avoid cuts and scrapes from edges.

•  

DO NOT

 use this product in a manner other than its intended purpose. It is NOT intended for

commercial use. It is not intended to be installed or used in or on a recreational vehicle and/or boats.

•  

DO NOT

 store this unit near gasoline or other combustible liquids or where other combustible

vapors may be present.

•  

DO NOT

 store or operate this product in an area accessible to children or pets. Store this unit in a

dry protected location.

DO NOT

 leave the unit unattended while in use.

DO NOT

 leave hot ashes unattended until the grill cools completely.

•  

DO NOT

 move the unit while in use or while ashes are still hot. Allow the unit to cool completely

before moving or storing.

NEVER

 use gasoline or other highly volatile fluids as a starter.

• Always cook your food on the grate after the flame is burned out.

•  Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and placing in a

noncombustible container. Make sure that there are no other combustible materials in or near the

container.

•  If you must dispose of ashes in less time than it takes for the ashes to completely cool down, then

remove the ashes from the unit, using heat-resistant gloves along with long metal tongs or fireplace

shovel.  Place the coals in aluminum foil and soak them completely with water before disposing of

them in a noncombustible container.

• Allow the unit to cool completely before conducting any routine cleaning or maintenance.

SAFETY INFORMATION

WARNING

This product and the fuels used to operate this product (charcoal or wood), and the

products of combustion of such fuels, can expose you to chemicals including carbon black, 

which is known to the State of California to cause cancer, and carbon monoxide, which is 

known to the State of California to cause birth defects or other reproductive harm. 

For more information go to www.p65Warnings.ca.gov

CALIFORNIA PROPOSITION 65

Содержание DGN576DNC
















Отзывы: