background image

3

 

 

DANGER

CAUTION

•  Do not use in an explosive atmosphere. Keep grill area clear and free from combustible 

   materials, gasoline and other flammable vapors and liquids.

Please read and understand this entire manual before attempting to assemble, operate or install 

the product. If you have any questions regarding the product, please call customer service at: 

1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.

•  Never use charcoal or lighter fluid with the grill.
•  Do not use gasoline, kerosene or alcohol for lighting. 
• The LP gas cylinder used with this appliance must be:
 

(a) Constructed and marked in accordance with the Specifications for LP-Gas Cylinders 

 

of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada,

 

CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods;

 

and Commision, as applicable; and

 

(b) Provided with a listed overfilling prevention device.

 

(c) Provided with a cylinder connection device compatible with the connector for outdoor

 

cooking appliances. This grill is not intended to be used in or installed on recreational

 

vehicles and/or boats.

• Never keep a filled container in a hot car or car trunk. Heat will cause the gas pressure to 
increase, which may open the relief valve and allow gas to escape.
• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn 
you severely.

SAFETY INFORMATION

Содержание DGC310BNP


















Отзывы: