28
Dymax SG-200 High-Flow Spray Gun System User Guide
Optional Configurations
Automated Systems
The SG-200 offers versatility beyond hand-held applications. By removing the lower handle portion of the
gun, the valve can be mounted to XYZ tables or robotic arms for automated environments, or where
application control is critical.
Figure 15. Robotic System
To use the SG-200 in an automated system:
1.
Remove the handle from the mounting plate of the valve, and pull tubing and trigger wiring through
handle free and clear.
2.
Place 345 controller and reservoir in preferred working locations, keeping distances between components
as short as possible.
3.
Disconnect 0.25" jack from rear of 345 controller, and replace with input from automation/PLC controller.
4.
Route material line to valve inlet.
5.
Route air actuation lines to valve.
6.
Mount valve onto arm/XYZ head (mounting plate not provided).
7.
Set 345 controller dispense time and duration in conjunction with XYZ speeds.
8.
Purge air and adjust atomizing/delivery ratios using regulators
9.
Try different nozzle/cap combinations to adjust fan and deposit patterns across different materials.