9
Dymax ECE ZIP™ Shutter User Guide
Figure 6. Attach Mounting Plate to
Reflector Housing
Figure 7. Attach Air Plenum to Filler
Plate/Reflector Assembly
4.
Install the Lamp Housing Assembly into the ZIP Shutter and attach it with four M4 x 8 screws (Figure 9).
NOTE: One side of the Filler Plate has a third screw hole (Figure 8). When in the correct position, this screw
hole will be at the rear of the Shutter.
Figure 8. Lamp Housing Assembly
Figure 9. ECE 5000 Lamp Housing
Assembly Installed with M4 x 8 Screws
Four M4 x 8 screws (two located on opposite side)
Third Screw Hole