2 0
U S E R G U I D E
|
B L U E W A V E
®
Q X 4
®
Set Up
In the ADMIN mode menu, the user can see the current power and time configuration
for each one of the LED heads. To update any LED head, navigate to the LED head by
pressing the POWER or TIME icons. The selected option will open a value input
window. Press
the pad’s button to edit. Any LED
head that is not connected displays a
N/A red icon. The user can still select and program any red-out rows, but the unit will
not run the program for the disconnected LED head.
Another screen will show the power (Figure 12). Input the required power directly
through the numeric keypad. The power can be set from a value of 10-100%, at 1%
increments.
When editing is finished, press the return key in the upper left corner to go back to the
ADMIN model menu.
Another screen will show the time (Figure 13). Input the required working time directly
through the numeric keypad. The time can be set from a value of 0-999s.
When editing is finished, press the return key in the upper left corner to go back to the
ADMIN model menu.
If the time is set to 0s, the LED head stays on until it is stopped manually.
Figure 11.
ADMIN Mode Menu
Figure 12.
Power Editing Screen
Figure 13.
Time Editing Screen
