Dyconn RAID Vault 2, Руководство пользователя

Страница: 5 / 12

4
INSTALLATION of hard drive
Please remove the plug of power supply from the outlet before installing the hard
disk, to avoid any electric shock or damage.
1. To remove the HDD tray: press and hold the
tray blue part with your Thumb and index finger to
pull the tray outward.
2. Place the HDD on the tray, remove the 2 side
snaps (blue color plastic), then place the HDD
onto the tray with the HDD screw holes onto the
pillars on the bottom of the tray.
3. Lock the HDD on the tray by replacing the side
snaps back to each side of tray.
4. Place the installed trays back to the enclosure,
connect the power cord back, connect the USB
3.0 cable with the USB port of your computer,
then turn ON the enclosure. The RAID VAULT 2
is ready for use..
Step 1: Install the 3.5” Hard disks
Step 1: Install the 2.5” Hard disks
1. Remove the side snap on each side of tray
2. Fix the 2.5” HDD on the tray with 4 screws
(enclosed in the package)