background image

26

TM

Dyconn Limited Warranty

DYCONN warrants only to the original purchaser of this product from a Dyconn-authorized 

reseller or distributor that this product will be free from defects in material and workmanship 

under normal use and service for one year after date of purchase. Purchaser must present 

acceptable proof of original ownership (such as original receipt, warranty card registration, 

on-line registration, or other documentation Dyconn deems acceptable) for the product. 

DYCONN, at its option, shall repair or replace the defective unit covered by this warranty. In 

order to keep this limited warranty in effect, the product must have been handled and used 

as prescribed in the instructions accompanying this warranty. This limited warranty does 

not cover any damage due to accident, misuse, abuse or negligence. This limited warranty 

is non-transferable and does not apply to any purchaser who bought the product from a 

reseller or distributor not authorized by Dyconn, including but not limited to purchases from 

internet auction sites. This warranty does not affect any other legal rights you may have by 

operation of law. Contact DYCONN at 1-(855) 839-2666 for warranty service procedures.

DISCLAIMER OF WARRANTY
EXCEPT FOR THE LIMITED WARRANTY PROVIDED 

HEREIN, TO THE EXTENT PERMITTED BY LAW, DYCONN DISCLAIMS ALL 

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES OF 

MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. TO THE 

EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY 

OPERATION OF LAW, ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION 

OF THIS WARRANTY. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON 

HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT 

APPLY TO YOU.

LIMITATION OF LIABILITY 
REPAIR OR REPLACEMENT OF THIS PRODUCT, AS 

PROVIDED HEREIN, IS YOUR EXCLUSIVE REMEDY. DYCONN SHALL NOT BE LIABLE 

FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT 

NOT LIMITED TO, LOST REVENUES, LOST PROFITS, LOSS OF USE OF SOFTWARE, 

LOSS OR RECOVERY OF DATA, RENTAL OF REPLACEMENT EQUIPMENT, 

DOWNTIME, DAMAGE TO PROPERTY, AND THIRD-PARTY CLAIMS, ARISING OUT OF 

ANY THEORY OF RECOVERY, INCLUDING WARRANTY, CONTRACT, STATUTORY OR 

TORT. NOTWITHSTANDING THE TERM OF ANY LIMITED WARRANTY OR ANY 

WARRANTY IMPLIED BY LAW, OR IN THE EVENT THAT ANY LIMITED WARRANTY 

FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL DYCONN’S ENTIRE 

LIABILITY EXCEED THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES/

PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU 

MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE AND 

PROVINCE TO PROVINCE.

Technical Support

For technical support, call 1-(855) 839-2666. You may also reach Dyconn technical support 

at [email protected].

Содержание Quartz 5































Отзывы: