Dyconn DE9E2S-G, Инструкция по эксплуатации

Страница: 14 / 17

14
Figure 6-2
Figure 6-1
Step
【
6
】
Adjusting Display Monitor
Forced movement of the Mount Bracket without loosening the screws will damage Mount
Bracket assembly or display monitor.
Adjusting the Mount Bracket Resistance
1. Product is designed to control the resistance in the Mount Bracket (1). To suit your
display swing side to side of 15 degree and tilt forward and backward of +/- 40 degree.
It is possible to control the amount of resistance in Mount Bracket (1) . ( See Figure
6-1 )
2. Referring to the weight of the display monitor. If the Mount Bracket tends to
automatically fall, it may be required to adjust the Mount Bracket joint to suit your
display monitor tilt position of forward and backward of 40 degree. To increase the
resistant of the Mount Bracket
(1) in order to secure tilt position, adjust the M5x15mm
Tension Hex Socket Cap Screw located around the Mount Bracket Joint using the
supplied Allen Wrench 4mm
(13). ( See Figure 6-2 )