Dyconn DE840D, Инструкция по эксплуатации, Страница: 12 / 22

Page 12
3. Determine depth of recessed mounting holes relative to the back of the surface of the
monitor and select proper length of Screws (2
、
3
、
4) .
4. Place the gas spring arm on the back of the display and align the mounting holes with
the VESA bracket. Thread the proper screws (2
、
3
、
4) through the VESA bracket and
into the back of the monitor (See Figure 2-3) .
5. Using a Phillips screwdriver, tighten the screws until the VESA bracket is firmly
attached to the monitor. Do not over-tighten the screws. Stop immediately once you
encounter resistance (See Figure 2-4) .
Figure 2-3
Figure 2-4