9
1.
First Before removing the pads, the piston as pressed with 2 knives screwdrivers into
the start position. Thereby damaging the piston is avoided.
2.
The linings are holded with a pin.
3.
This pin is secured with a ring.
4.
Remove the ring with a screwdriver.
5.
Drive out the pin (figure 6) with a plastic hammer from the side of the wheel.
6.
Take out the spring.
7.
Take out the linings.
8.
Press the pistons back so far as possible. Use two screwdrivers simultaneously from
two sides. Never use force! Don`t damage the seal!
9.
Put in the new linings and fix them with pin and spring.
10.
Secure the pin.
11.
If you think you are not capable to do this work so please contact a garage.
Aufbau der hydraulischen Bremszange
Abb.8 Scheibenbremse figure 8 disk brake
Structure of the hydraulic brake caliper.
