Model XE580s
Work
Disassembling and Assembling
of parts
Parts
10
Bushing
Housing
Rev
Procedures
1. Follow procedures 2 and 3 to take
apart Connecting Arm and Pedal
Arm.
2. Use 12 mm wrench to release 5/16"
x 15m/m hex head bolt with 5/16" x
35 x 1.5T flat washer and the
Bushing Housing can be released, as
shown in figure 1.
3. To resume, be sure that
25 wave
washer is returned onto the shaft
which is applied with thicker grease
then return the Bushing Housing
onto the shaft and tighten with 5/16"
x15m/m hex head bolt with 5/16" x
35 x 1.5T flat washer, as shown in
figures 2 and 3.
4. Follow procedures 3-4 and 2-5 to
return Pedal Arm and Connecting
Arm.
1
2
3
