Dyaco ST95-YT007, Руководство по обслуживанию

Страница: 33 / 82

S
S
e
e
r
r
v
v
i
i
c
c
e
e
M
M
a
a
n
n
u
u
a
a
l
l
-33-
7.1 Important Safety Instructions
- To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to cleaning and/or service work.
- To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a flat level surface with access to a 230-volt, 10-amp
grounded outlet with only the treadmill plugged into the circuit.
- Do not use an extension cord unless it is a 16 AWG or better with only one outlet on the end. Do not attempt to disable the grounded plug by using
improper adapters or in any way modify the cord outlet.
7.2 Important Electrical Instructions
- Never use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a large motor, the GFCI will trip often.
Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels..
- Circuit Breakers : Some circuit breakers used in homes are not rated for high inrush currents that can occur when a treadmill is first turned on or
even during use. If your treadmill is tripping the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the
treadmill itself does not trip, you will need to replace the home breaker with a high inrush type. This is not a warranty defect. This is a condition we
as a manufacture have no ability to control. This part is available through most electrical supply stores. Examples:
Grainger part # 1D237, or
available online at www.squared.com part # QO120HM.
7.3 Important Grounding Instructions
- This product must be grounded. If the treadmill should malfunction or breakdown, ground- ing provides a path of least resistance for electric
current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
- DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product
if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 230-volt circuit, and has a
grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect
this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a
properly grounded outlet, (shown below) can be installed by a qualified electrician. The green colored rigid earlug, or the like, extending from the
adapter, must be connected to a permanent ground
such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place
by a metal screw.