Dyaco Sole Fitness 16208179000, Руководство пользователя

Страница: 26 / 33

26
Customer Service 1-888-707-1880 Dyaco Canada Inc.
Email: customerservice@dyaco.ca
3-IN-ONE Oil or 10W
oil. Do not use
silicone-based
lubricants
Inspect for excessive wear or
a dry leather brake pad
TROUBLESHOOTING
No Display on Console
1. Press any key to bring the console to 'Quick Start' mode.
2. Ensure the battery icon is not shown on the Console and transmitter have batteries installed
properly. Red LED light will flash on the transmitter when battery is low.
RPM or HR does not change
1. Press' MODE key' repeatedly to toggle between SPEED (SPD), DISTANCE (DIST), TIME (TIME) and
CLOCK (CLK) values.
2. Holding' PAGE key' to clear past measured value or go into setting and exit.
Cadence number jumps high or low
1. Separate bikes may be paired to same console and are cross-talking; simply run transmitter pair
stage again on the bike.
2. Relocate the bike to a different part of the room, away from any RF interference areas.
Heart Rate signal gets interrupted or drops out
1. Ensure that there is a minimum distance of 36 inches between bikes.
2. Make sure your Bluetooth HR monitor is secure, and electrodes are making contact with your chest
at all times.
No Heart Rate signal displayed
1. Ensure your Bluetooth HR monitor is worn correctly and there is moist under electrodes of the
Bluetooth HR monitor.
CAUTION
EXTERNAL INTERFERENCE MAY BE CAUSED BY OTHER ELECTRONIC DEVICES, SUCH AS NEARBY
TELEVISIONS, STEREO EQUIPMENT, SPEAKERS, ELECTRICAL WIRE CABLING, ETC. IF YOU
EXPERIENCE DISTURBANCES IN CONSOLE DISPLAY, TRY MOVING YOUR BIKE (S) AWAY FROM
POTENTIAL RF INTERFERENCE AREAS.
RELOCATE THE BIKE AWAY FROM ANY EQUIPMENT THAT COULD POTENTIALLY INTERRUPT THE
RADIO FREQUENCY SIGNAL, SUCH AS A DVD PLAYER OR TELEVISION, ETC.
MAINTENANCE GUIDELINES
MAINTENANCE SCHEDULE
PART RECOMMENDED ACTION FREQUENCY CLEANER LUBRICANT
Pedals Ensure that pedals are tight in
crank arms; that all screws on
pedals are tight; and that the
pedal straps are not frayed
Before each
use
N/A N/A
Frame Wipe down by using a soft,
damp clean cloth
Daily Water N/A
Flywheel Wipe down by spraying on a
rag and applying a light coat
to sides of the flywheel
Weekly WD-40
spray.
N/A
Brake
Pad
Inspect for excessive wear or
squealing
Weekly N/A
Silicone Spray
1. Do not service internal parts of pedals. If they are found to be worn internally, we
recommend replacing the pedal.
2. Use of lubricants or cleaning solutions other than those so specified will result in
diminished performance and a shorter life span for that part.