32
DXE-CW9 - Shielded Control Wire, 9 conductor, per foot
DXE-CW9-1K
is a high quality shielded outdoor FTP (Foil Twisted Pair) CAT 5e cable. It features 4 twisted pairs of
24 AWG solid wire with aluminum foil shielding plus a solid tinned copper drain wire - providing a total of 9
conductors for DC switching applications. It has a polyethylene jacket and is rated for direct burial. This cable is ideal
for DX Engineering Remote Antenna Switches and Four Square arrays, and should be considered for any low-current
custom remote switching application you have - such as receiving antenna arrays. Order by the foot in the length you
require. A nice feature is the "rip cord", which allows for easy stripping of the heavy jacket without worry about
nicking or accidentally cutting the conductors. Excellent for use in all outdoor applications of switching, networking,
data transfer and phone lines. As a data transfer line, it supports 10/100/1000Mbps.
DXE-CW9-1K - Shielded Control Wire, 9 conductor, 1000 ft reel
DXE-CW9-1K
is a 1000 foot box of high quality shielded outdoor FTP (Foil Twisted Pair) CAT 5e cable. It
features 4 twisted pairs of 24 AWG solid wire with aluminum foil shielding plus a solid tinned copper drain wire -
providing a total of 9 conductors for DC switching applications. It has a polyethylene jacket and is rated for direct
burial. This cable is ideal for DX Engineering Remote Antenna Switches and Four Square arrays, and should be
considered for any low-current custom remote switching application you have - such as receiving antenna arrays. A
nice feature is the "rip cord", which allows for easy stripping of the heavy jacket without worry about nicking or
accidentally cutting the conductors. Excellent for use in all outdoor applications of switching, networking, data
transfer and phone lines. As a data transfer line, it supports 10/100/1000Mbps.
The
DXE-CW9
CAT5 cable has #24 AWG wire. Based on current and voltage drops, CAT 5 cable is capable of running 400
feet from the Four Square Control Console to the Four Square Phasing Unit.
For control cable runs from 400 feet up to 750 feet, doubling up the wire pairs of the
DXE-CW9
CAT5 cable (two wires per
connection) will effectively make the wire gage go from 24 AWG to 20 AWG, thus allowing longer runs between the Four
Square Control Console and the Four Square Phasing Unit.
Technical Support
If you have questions about this product, or if you experience difficulties during the installation,
contact DX Engineering at (330) 572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this manual before you call.
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s products are claimed to be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof furnished by Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2013
DX Engineering
®
, DXE
®
, DX Engineering, Inc.
®
, Hot Rodz
®
, Maxi-Core
®
, DX Engineering THUNDERBOLT
®
, DX Engineering Yagi Mechanical
®
,
EZ-BUILD
®
, TELREX
®
and Gorilla Grip
®
Stainless Steel Boom Clamps, are trademarks of PDS Electronics, Inc. No license to use or reproduce any
of these trademarks or other trademarks is given or implied. All other brands and product names are the trademarks of their respective owners.
Specifications subject to change without notice.