DX Engineering DXE-R8C-SYS-V3, Руководство пользователя

Страница: 5 / 32

- 5 -
lines through two opposite vertical element pairs (tangents) that point to the receiving direction.
Elements 1, 2 and 5, 6 are selected as the default for a forward direction of North-East for North
America, with elements installed as shown. A mirror image of this element positioning would
achieve a typical default North-West for European installations.
Figure 1 - Typical Diagram of the DXE-R8C-SYS-V3 Receive Eight Circle Array System
System Overview
The
DXE-R8C-SYS-V3 system is comprised of the modified DXE-CC-8A Eight Position Control
Console, the DXE-RCA8C-1 Receive Eight Circle Array Controller, eight DXE-RSEAV-1
Receive Short Element Active Vertical Antennas and one Delay Cable with F-Connectors installed.
These units interconnect and work together using factory default settings to control the Receive
Eight Circle Array. The modified
CC-8A control console uses BCD switching voltages for the
RCA8C-1 to change the receiving direction of the array and supply power to the Active Verticals.
When the modified
CC-8A Eight Circle Control Console and the RCA8C-1 Receive Eight Circle
Array Controller are connected as shown in the installation section below and the layout is as
described for North America in
Figure 1 , the switch positions on the modified CC-8A will switch
the array in the eight directions as shown in Figure 2 .
Figure 2