- 14 -
Optional Accessory Items
COMTEK Control Wire, 4 Conductor, Sold per Foot - COM-CW4
A high quality, PVC jacketed 4-wire control cable, COM-CW4 consists of 4 #20 AWG conductors. It may be used in
a multitude of control cable applications, such as remote switching and antenna rotators.
Sold by the foot - order the length you need.
DX Engineering DXE-213U an RG-213/U Coax Assembly
These DX Engineering cable assemblies use high quality
DXE-213U
coaxial cable and include Silver/PTFE PL-259
(UHF) or male N connectors installed at each end.
DXE-213U
cable is protected by a non-contaminating PVC jacket
and is normally recommended for both indoor and outdoor applications. The UV stabilized jacket assures long life
where ultraviolet contamination is a concern. Manufactured to MIL-spec (MIL-C-17, M17/163-00001), you can
always be sure of getting the highest quality cable. The coax has a flexible 12.5 gauge stranded copper center, Poly
dielectric, 96% coverage bare copper shield and a non-contaminating PVC jacket. The PL-259 connector is Silver/PTFE with a silver
plated center conductor. The N connector is Silver/PTFE with a gold center conductor. Connectors are soldered rather than crimped
and an adhesive lined shrink tubing is used to form a weather-resistant bond between the connector body and the coax. Each
assembly is then 100% Hi-Pot tested to guarantee a quality cable assembly you can count on.
Custom Lengths Available, Call DX Engineering for Details
UMI-81343, DXE-NSBT8 - Anti-Seize & Never-Seez®
An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other hardware to prevent galling and
thread seizure. Any of these products can be used for this purpose.
*
UMI-81343
Anti-Seize, 1 oz. Squeeze Tube
*
UMI-81464
Anti-Seize, 8.5 oz. Aerosol Can
*
DXE-NSBT8
Never-Seez®, 8 oz. Brush Top
*
DXE-NMBT8
Never-Seez®, 8 oz. Brush Top, Marine Grade
* These products are limited to domestic UPS Ground shipping only
LCT-37534 - Dielectric Grease, .33 Ounce Tube
Loctite® Dielectric Grease is ideal for keeping moisture from entering your coaxial connections. It also acts as a lubricant
allowing easy connector removal by stopping corrosion of electrical connectors. Safe for all RF connections.
50Ω Coax Cable Prep Tools
The UT-8213 (red tool) simplifies the preparation of RG-8 or RG-213 coax to accept PL-259 UHF style or 2-piece Type N
connectors. The UT-808X (green tool) is specifically designed for stripping RG-8X/Belden 9258 cable. The CNL-911
cutters have specially designed blades to cut the cable without crushing it - leaving the end cleanly cut and ready for
stripping and connector assembly. The UT-80P or UT-80N allows mechanical assembly of the PL-259 or 2-piece Type N
connector body to the cable without shredding it with pliers. All DX Engineering Cable Prep Tools are designed and
selected to provide better results, with greater ease of use.
DXE Part #
Part Name
DXE-UT-8213
Coax Cable Stripper for RG-213, RG-8, 9913F7, LMR-400 etc.
DXE-UT-808X
Coax Cable Stripper for RG-8X, Belden 9258, LMR-240
DXE-UT-RB-HD
Premium Replacement Blades for DX Engineering and Cablematic Strippers
DXE-UT-80P
Connector Assembly Tool for PL-259/RG-213-size Cable
CNL-911
Coax Cable Cutter
DXE-170M
Precision Shear Side Cutters
TES-2155 - 3M Temflex™ 2155 Rubber Splicing Tape
.
Conformable self-fusing rubber electrical insulating tape. Designed for low voltage electrical insulating and moisture
sealing applications. For outdoor use, it should be protected from UV deterioration with an overwrap of
TES-06132
