e-mail: [email protected]
www.hummelmasten.de
Seite
Hummelmasten, 75417 Mühlacker, Industriestr. 14/1
Tel. +49-7041-45 2 44, Fax -86 43 08
Pull the carriage on the head tube.
After this you can fix the head plate with the
pulley.
No.34 or side steams you
have to mount now.
Take the winch, read instructions for install the
crank on it. Here you see the parts you need for
It is only possible to put the
screws from behind into MW1
see this picture.
Segments:
The nuts in the foot segment
Loosely screw in. The next segment
Push it loose, loosely here as well
They can be aligned. Compensate transitions!
Only then are the screws tightened with tor-
que. The head segment is now assembled in
the same way.
