- 3 -
Installation
Using customer
supplied Ring
Terminals, connect
the user supplied
Ladder Line and
Ground Wire to the
connections on the
Ladder Line Surge
Protector. It is
suggested the Ring
Terminals are
soldered to the ladder
line and ground wire.
TX connections go to
the transmitter/ tuner
output or balun. ANT
connections go to the
antenna input. GND connection goes to ground.
When mounting the Ladder Line Surge Protector, ensure the box is straight and the weep holes, that
are drilled in the lower front edge, are downward to allow any moisture build up to properly drain.
