DX Engineering DXE-BFS-1 Скачать руководство пользователя страница 11

- 10  - 

DXE-RTR-1A   Receive Antenna Interface for Transceivers

 

Now you can add a dedicated receive antenna to HF transceivers which lack a separate RX antenna input port - or 
protect an un-switched RX ANT port on your transceiver! The DXE-RTR-1 Receive Antenna Interface (Patent 
Pending) is a unique multi-purpose switch unit which automatically or manually switches the RF output antenna 
connector on any HF transceiver between a separate receiving antenna system and a standard transmitting antenna. The 
switching is fast enough - about 4 ms. - to allow QSK CW operation.  In its simplest application, it allows you to add a 
receiving preamp to improve reception of those really weak ones!  The DXE-RTR-1 enables operators to enjoy the 
improved reception that a low noise receiving antenna system offers. Connection to a Beverage, Receive Four-Square, 
Active Receive Antenna, and other receiving antennas and accessories is now possible, safely, only with the DXE-RTR-
1. 
 
Requires 12 VDC for operation, or order DXE-PSW-12D1A AC adapter. 

•Attractive Heavy Stainless Steel Enclosure 
•200 Watt Switching Capability 
•Supports CW full break in  
•Main Antenna has SO-239 connector 
•Receive Outputs use RCA phono and Type F connectors 
•Safe switching - transmit antenna is always connected to transceiver on power-off  
•Hot switching lockout - disables receive antenna during transmit mode 
•Versatile - allows inclusion of RF Preamps and other RX accessories 

 
 

ARR-8560  -  ARRL ON4UN's Low Band DXing, 5th Edition

 

The fifth edition features new and updated material. 

Highlights include…

  

…a thoroughly revised discussion of 

receiving antennas.

 You’ll discover how to greatly enhance their operational 

bandwidth. In addition, low-signal transformers for Beverages and other receive-only antennas are analyzed in great 
detail, along with effective common-mode filters.  
…a new examination of 

phased arrays

, with new concepts such as the hybrid-fed 4-square array and opposite-voltage 

feed system. This is a must-read for every serious antenna builder!  
…dozens of new propagation maps based on DX Atlas, as well as an in-depth analysis of the influence of sunspot 
cycles on 160-meter ducting.  
…a new discussion of cutting edge technology including 

Software Defined Radio

 and the revolutionary 

LP-500 

Digital Station Monitor.

  

 
Contents:

 

 

Propagation  

 

DXing on the Low Bands  

 

Receiving and Transmitting Equipment  

 

Antenna Design Software  

 

Antennas: General, Terms, Definitions  

 

The Feed Line and the Antenna  

 

Receiving Antennas  

 

The Dipole Antenna  

 

Vertical Antennas  

 

Large Loop Antennas  

 

Phased Arrays  

 

Other Arrays  

 

Yagis and Quads  

 

Low Band DXing from a Small Garden  

 

From Low Band DXing to Contesting 

 

 

CD-ROM included!

 The CD-ROM includes the entire book in a fully searchable PDF format as well as ON4UN’s 

software (Windows XP only), antenna modeling files, photographs and more.

Содержание DXE-BFS-1













Отзывы: