- 16 -
The
DXE-SA80-AOK
allows easy adjustment for lowest SWR. The
DXE-SA80-AOK
will aid in
tuning a low impedance antenna to the minimum SWR in the customer selected portion of the 80
meter band without affecting operation on the other, higher frequency bands. The #12 AWG coil
wire is tin-nickel plated for high power handling, corrosion resistance, ease of soldering and long
term reliability.
Refer to the shelf hole layout drawing in
Figure 1
. There is one radial wire mounting hole used to
mount the
DXE-SA80-AOK
. Remove the existing radial wire and hardware. Move the removed
radial wire to the next radial mounting hole and connect it there (double up on one radial mounting
hole). Mount the insulated coil mounting bracket to the "L" bracket on the coil assembly using the
hex head bolt, two flat washers, star washer and Nyloc nut as shown in
Figure 21
.
Figure 21
Install the coil assembly to the mounting shelf using the hex bolt, two flat washers, one external
tooth washer and Nyloc hex nut as shown in
Figure 22
.
Figure 22
The wire with ring terminals goes from the end of the coil to the MatchBoxx™ "ANT" connection
as shown in
Figure 23
.
Figure 23
