background image

- 21  - 

Optional Accessory Items

 

 
UMI-81343, DXE-NSBT8  -  Anti-Seize &  Never-Seez®  

An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other hardware to prevent galling and 
thread seizure. Any of these products can be used for this purpose. 

*

UMI-81343 

Anti-Seize, 1 oz. Squeeze Tube

 

*

UMI-81464 

Anti-Seize, 8.5 oz. Aerosol Can

 

*

DXE-NSBT8 

Never-Seez®, 8 oz. Brush Top

 

*

DXE-NMBT8 

Never-Seez®, 8 oz. Brush Top, Marine Grade

 

* These products are limited to domestic UPS Ground shipping only 

 
 
 
DXE-P8A  -  Penetrox™ A Anti-Oxidant - 8 oz Squeeze Bottle 

Use Penetrox™ A electrical joint compound to affect a substantial electrical connection between metal parts such as telescoping 
aluminum tubing or other antenna pieces. Ensures high conductivity at all voltage levels by displacing moisture and preventing 
corrosion or oxidation. For Aluminum to Aluminum, Aluminum to Copper, or bare conductors. Not recommended for use with 
rubber or polyethylene insulated wire.  

 

8 oz. squeeze bottle 

* This product is limited to domestic UPS Ground shipping only

 

 
 
 
DXE-RADW  - 500K or 1000K  Radial Wire Kits and Components

 

To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire kits 
use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at the big box 
stores. It will last much longer in contact with soil than bare wire. 
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!  

 

500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation  

 

20/40 lugs  

 

100/200 radial wire anchor pins - Eliminating the need to bury your radials!  

 

Build up to 20/40 radials, 25 feet long 

DXE-RADW-500K 

Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Staples 

DXE-RADW-1000K 

Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Staples 

 
 

 
DXE-RADW-500KBD or 1000KBD - Bulk Radial Wire Kits and Components 

To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire 
kit use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at 
the big box stores. It will last much longer in contact with soil than bare wire.  The biodegradable anchors allow easy 
installation of radial wires, and will degrade and disappear in a year or so when they are no longer needed. The DXE-
RADW-500 or 1000KBD kit provide everything you will need to build the perfect radial system!  

 

500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation  

 

20/40 lugs  

 

100/200 biodegradable radial wire anchor pins- Eliminating the need to bury your radials!  

 

Build up to 20/40 radials, 25 feet long 

DXE-RADW-500KBD 

Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Biodegradable Staples 

DXE-RADW-1000KBD 

Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Biodegradable Staples 

 

 
 
DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole/20 Pack 

This is a set of 20 ring terminals for AWG #14 to 16 wire with a clearance hole for a 1/4" bolt.  These are the same crimp 
terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.  

 
 
 
 
 

 

Содержание DXE-7580FS-VA-1

























Отзывы: