- 3 -
Parts Included
Description
Quantity
Mount Plate
1
Mast Mount Channel
1
3/8 U-Bolt x 2" ID x 3.25" leg, Saddle & Hardware
2
1/4-20 x 1" Hex Head Bolt
1
1/4" Star Washer
2
DXE-CAVS-1P V-Bolt Saddle Clamp
2
DXE-ECL-040 - Element Clamp
1
DXE-ECL-060 - Element Clamp
2
DXE-ECL-10SS - Element Clamp
2
DXE-ECL-12SS - Element Clamp
1
DXE-ECL-16SS - Element Clamp
2
DXE-ECL-20SS - Element Clamp
2
DXE-ECL-24SS - Element Clamp
2
Black Vinyl Cap, for 1/2" O.D.
1
Aluminum Spacer
4
1/4-20 x 2" Hex Head Bolt, full thread
4
1/4-20 Hex Nut
6
1/4" Split Washer
4
1/4" Flat Washer
10
Antenna Element Parts
Quantity
2" (2.00") x 36" Element, Drilled (split one end)
1
1-7/8" (1.875") x 18" Element, Cut, Drilled
1
1-7/8" (1.875") x 36" Element (split one end)
1
1-3/4" (1.750") x 36" Element (split one end)
1
1-5/8" (1.625") x 36" Element (split one end)
1
1-1/2" (1.500") x 36" Element (split one end)
1
1-3/8" (1.375") x 36" Element (split one end)
1
1-1/4" (1.250") x 36" Element (split one end)
1
1-1/8" (1.125") x 36" Element (split one end)
1
1" (1.000") x 36" Element (split one end)
1
7/8" (0.875") x 36" Element (split one end)
1
3/4" (0.750") x 36" Element (split one end)
1
5/8" (0.625") x 36" Element (split one end)
1
1/2" (0.500") x 36" Element
1
Installation
Site Selection
Select a mounting location clear from power lines, structures and other antennas by a minimum of
46 feet (added 10 feet for the 10 foot safety rule).
Consider overhead power lines, utility cables
and wires
. The further away the vertical is mounted from local noise sources or other metallic
objects, which can re-radiate noise and affect the tuning, radiation pattern and SWR, the better. If
you are installing the optional
DXE-TB-4P
Tilt Base, determine the direction you want the antenna
to tilt down and make sure there is adequate clearance. There should be sufficient room for a radial
system that will extend away from the antenna equally in all directions, if possible.
