- 7 -
E. Starting about one inch before the previously installed 3M Temflex™
2155 Rubber Splicing Tape start a wrap of the
Scotch
®
Super 33+ tape. While wrapping, over
lap the previous wrap by about 50%. Use firm
pressure while wrapping to ensure the tape is on
flat and there are no wrinkles or open spots.
Keep wrapping the Scotch
®
Super 33+ tape until you are about an inch
past the end of the previously installed 3M Temflex™ 2155 Rubber
Splicing Tape. Use the scissors to cut the tape rather than stretching
and breaking the tape.
Using these quality products and this method, the completed
weatherproofing will be complete and reliable.
On-Line Instructional Videos
DX Engineering has a number of instructional videos that you can view on-line that show products
used in this guide as well as other informative videos.
You can view the videos at the DX Engineering website in the “Tech Info & News” section on the
web site.
Manual Updates
Every effort is made to supply the latest manual revision. Occasionally a manual will be updated
between the time your DX Engineering product is shipped and when you receive it. Please check
the DX Engineering web site (
) for the latest revision manual.
Technical Support
If you have questions about this product, or if you experience difficulties during the installation,
contact DX Engineering at (330) 572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this guide before you call.
