1. Select a convenient location for the antenna
that is near the TV or STB.
2. Connect the antenna’s coaxial cable to your
TV’s 75-ohm Terrestrial (UHF/VHF) terminal
or STB’s 75-ohm antenna terminal.
3. Connect the supplied AC adapter’s DC plug
into the DC jack on the back of the antenna,
then connect the AC adapter to AC outlet.
INSTALLATION INSTRUCTION
1
2
1. Select channel you want to watch.
2. Move the extended VHF dipoles (channels
2-13) or the UHF loop antenna (channels 14
and higher) until you get the best picture
possible.
3. Furthermore, adjustment the reception tuning
knob until you get the best picture possible.
4. This process may need to be repeated each
time channels are changed.
NOTE:
• This antenna might not receive signals in locations of faint electric fields or poor reception
environment to receive ATSC/NTSC signals.
• Use of any AC adapter not included with the antenna or recommended or sold by the antenna
manufacturer may result in a risk of fire, electric shock, or injury and will void your warranty.
3
2. Secondly turn UHF loop antenna
1. First bring two dipole antennas.
Take off the caps before using.
TV
STB
or
Tuning and Adjustment
