Series CP/CN/CT/CX
|
Coolpoint
®
Vortex Shedding Flowmeter
Specifications - Installation and Operating Instructions
Bulletin F-CP/CN/CT/CX
The
Series CP/CN/CT/CX Coolpoint
®
Vortex Shedding Flowmeter
is made for
water, water/glycol mixtures, or low viscosity fluids. These units contain no moving
parts to clog or wear, allowing for minimal maintenance in the field. This series has two
versions: a 3-wire version, where power is supplied separate from the 4-20 mA output,
and a 2-wire loop-powered version. The 3-wire version is equipped with a solid state
relay that can be configured in the field to be either an alarm or a pulse output, an LED
display which allows the user to choose between selectable engineering units (GPM or
LPM), and a high temperature option. The alarm on this version is selectable between
a high or low alarm (NO or NC) and the pulse output option is set at a frequency at a
specific pulses per gallon. The 2-wire option allows for operation in an intrinsically safe
mode only when used in conjunction with an approved intrinsic safety barrier meeting
required entity parameters. This version does not come with a display or relay contacts
to allow for this operation mode.
SPECIFICATIONS
Service:
Compatible liquids.
Range:
See flow rate chart.
Display:
3-digit or 4-digit LED (pipe sizes > 3˝), 0.3˝ (7.6 mm) digit height; CP-V8:
3-digit LCD (6-digit LCD totalizer mode), 0.3˝ (7.6 mm) digit height.
Wetted Materials:
Flow body: 316 SS or brass; Sensor: PEEK; Seals: FKM.
Accuracy:
Flow: ±2% FS; Temperature: ±2°F (±0.1°C) (model selectable).
Repeatability:
±0.25% of reading.
Turndown:
10:1 (20:1 optional).
Temperature Limits:
35 to 210°F (2 to 99°C).
Pressure Limits:
10 to 300 psig (0.7 to 20.7 bar); CP flange and CX: 200 psig
(20.7 bar) max.
Response Time:
450 ms.
Power Requirements:
10-30 VDC @ 80 mA standard; 25 mA for 2 wire option;
CP-V8: 2 AA alkaline batteries, not included (45 day battery life).
Output:
4-20 mA; 100 pulses per gallon (3-wire models only); 2˝, 3˝, and 4˝:
25 pulses per gallon.
Deadband:
Alarm output: 2.5% FS for up to 1/2˝; 5% FS for larger than 1/2˝.
Viscosity:
15 cP max.
Enclosure Rating:
NEMA 4X (IP65).
Process Connection:
Female NPT, BSPT, or BSPP (model selectable).
Electrical Connection:
Male DC micro 5 pin connector; Pigtails or junction box
with terminal strip (model selectable).
Weight:
CX: 1.5 lb (0.7 kg); CP: 3.3 lb (1.5 kg); CP-V8:4 lb (1.8 kg); CN, CT: 7 lb
(3.2 kg).
Compliance:
CSA.
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219-879-8000
Fax: 219-872-9057
www.dwyer-inst.com
e-mail: [email protected]
D
C
E F
B
A
NPT FEMALE
CONNECTION
IN
OU
T
CP2, CP3, CP4
CP/CN6, CP/CN8, CN12, CN16
CPM8
CX8-M7
CPX-V8
CP24, 32 (shown with -C3/-C14 conduit box)
CXX-M5
CTx (shown with -C2 pig tail connection)
NPT FEMALE
CONNECTION
A
B
F E
D
CONTROL BOX CAN
BE ROTATEDTO ANY
OF [4] DETENTED
POSITIONS IN
90° INCREMENTS
C
OPTIONAL -C2
PIG TAIL CONNECTION
C
D
B
A
E F
NPT FEMALE
CONNECTION
A
B
C
D
E
F APPROXIMATE
SWING RADIUS
IN
OU
T
D
A
B
E APPROXIMATE
SWING RADIUS
C
FLOW
OUT
FLOW
IN
EF
G
C
B
A
CONTROL BOX CAN BE ROTATED
TO ANY OF [4] DETENTED
POSITIONS IN 90° INCREMENTS ØH
.500-14 NPT
CONDUIT CONNECTION
D
A
4.592 MAX.
[117 MM]
MOUNTING LUGS FOR
Ø.31 [5/16] BOLTS. [4] PLACES.
3-1/4 MAX.
[83 MM]
5 MAX. [127 MM]
1.312
[33 MM]
C
POSITION N4
B
CONTROL BOX
CAN BE ROTATED
TO ANY OF [4]
DETENTED POSITIONS
IN 90° INCREMENTS
POSITION N3
POSITION N2
OUT
FLOW DIRECTIO
N
POSITION N1
A
B
C D
E
F APPROXIMATE
SWING RADIUS